Borika FASTen reinforced mounting platform for the Mp225 inflatable boat

This mounting pad has an increased area (140 x 140 mm) and is marketed by BORIKA as "reinforced." It includes a reinforcing polyamide washer.
This platform is recommended for use in cases where the accessory installed in the lock is subject to increased load: used for towing, for attaching a heavy anchor, or, for example, for installing a spinning rod holder when using deep-sea wobblers that create high resistance.
As with the MP224 mounting platform, the manufacturer recommends installing multiple platforms on a sidewall at 305 mm intervals. This will allow you to use FASTEN components that are installed in two locking positions, such as a table or various tarpaulins.
The installation of the platform is exactly the same as in the case of the Mp224 platform:
Select the location where the FASTEN device will be installed, secure the stencil with masking tape, degrease the surfaces, prepare the adhesive according to the instructions, and apply the first coat to both surfaces. Wait 3 to 5 minutes, then apply the second coat. Wait 5 to 10 minutes until the adhesive no longer sticks to your fingers. Warm both surfaces with a hair dryer and press them firmly together. It's a good idea to roll the outer surface of the pad with a hard, convex object, such as a screwdriver handle.

Please note that, like other FASTEN items, this product is available in black, white, and gray. Be sure to check this with a manager.

This product is available in black, gray, and white. Please specify your preferred color when ordering.