AquaStar D-249FFD is the smallest representative of the budget series of Dingi-Boat motor boats.

The welded frame of the Dingi-Boat D-249FFD is reinforced at the cheeks and cones. It consists of three pressurized compartments (sealed chambers separated by airtight baffles)—a forward and aft compartment, each 35 cm in diameter. The baffles between the compartments are designed like a bag. If one of the compartments is punctured, the bag-shaped baffles move in the direction of the puncture. This maintains pressure in the damaged compartment, keeping the boat afloat. The Dingi-Boat frame is guaranteed for 60 months.

The boat is made of five-layer reinforced PVC with a density of 900 g/m², making it resistant to frost, frequent kinks, and all kinds of mechanical damage. The AquaStar Dingi-Boat D- 249 FFD can accommodate a motor with a maximum power rating of 5 hp and a standard 38 cm keel.

The Dingi-Boat D- 249 FFD is equipped with two sliding seats that are mounted on special soft guides at the top, along the boat's cylinders.
Passenger capacity: two people.

Transporting an inflated boat to the pond is easy, because there is a cast handle at the front and two soft ones at the back.
Spray gussets are installed at the corners between the bladder and the rear wall of the transom. These gussets help to deflect the water that lashes against the boat when the motor is in reverse.

All AquaStar boats are certified according to European requirements and standards. The CE marking on the boats confirms their compliance with current European Union directives and their safety for consumers (Directive 94/25/EC, June 16, 1994).

Equipment:
Boat;
Seats;
6 liter pump;
Hard flooring;
Oars;
Handles for carrying the boat;
Lifeline;
Repair kit;
Boat carrying backpack;
User manual.

This model comes with a hard bottom deck!