AquaStar D-249 is the smallest representative of the budget series of Dingi-Boat motor boats.

The welded frame of the Dingi-Boat D- 249 is reinforced at the "cheekbones" and cones. It consists of three pressure chambers (sealed compartments separated by airtight baffles)—a forward and aft, each 28 cm in diameter. The baffles between the pressure chambers are of a bag-like design. If one of the boat's pressure chambers is punctured, the bag-like baffles are deployed in the direction of the puncture. This maintains pressure in the damaged compartment, keeping the boat afloat. The Dingi-Boat frame is guaranteed for 60 months.

The boat is made of five-layer reinforced PVC with a density of 900 g/m², making it resistant to frost, frequent kinks, and all kinds of mechanical damage. The AquaStar Dingi-Boat D- 249 can accommodate a motor with a maximum power rating of 5 hp and a standard 38 cm keel.

The Dingi-Boat D- 249 is equipped with two sliding seats that are mounted on special soft guides at the top, along the boat's cylinders.
Passenger capacity: two people.

Transporting an inflated boat to the pond is easy, because there is a cast handle at the front and two soft ones at the back.
Spray gussets are installed at the corners between the bladder and the rear wall of the transom. These gussets help to deflect the splashing water that occurs when the boat is in reverse.

Equipment:
Boat;
Seats;
6 liter pump;
Oars;
Handles for carrying the boat;
Lifeline;
Repair kit;
Boat carrying backpack;
User manual.