AquaStar Dingi-Boat D-310SLD is a keeled motorboat with a carrying capacity of 400 kg.

Passenger capacity: three people.
The AquaStar D-310SLD consists of four watertight compartments. Three of these compartments make up the inflatable boat's frame. The fourth watertight compartment is the keelson. The keel is inflatable and located between the fabric bottom and the wooden deck. It looks like a tube expanding from stern to bow. When the keelson is inflated, the space between the bottom and deck expands, exerting significant tension on the fabric deck. Due to the deadrise, boats of this type perform much better underway than flat-bottomed boats. The keelson also improves load-bearing capacity, unsinkability, stability, and, most importantly, safety.
Length 3.10 m, width 1.32 m, cylinder diameter 35 cm.
The boat is equipped with an SLD deck—full name: SOLID LIGHTWEIGHT-RIGID DECK (English). It's very similar to the FFD folding deck, but it has an air valve hole for the inflatable keelson and is made of thicker 9mm plywood. Therefore, it can be used on motor keelboats with an inflatable keelson. It weighs 4-7 kg and has a non-slip coating. Installation time is up to 1 minute. Removal time is a few seconds.
Along the sides of the boat, inside, there are aluminum stringers that perform several functions: they firmly hold the bottom and strengthen the boat frame from folding and bending in waves.
The AquaStar D-310SLD design includes a fixed transom for a motor with a standard 38 cm leg and a maximum power of 8 hp.
The AquaStar D-310SLD is made of durable, wear-resistant reinforced PVC fabric with a density of 900 grams per square meter. All seams, both longitudinal and circular, are welded.
This boat is equipped with two sliding seats that are mounted on special rails along the boat's buoyancy tubes. This feature offers numerous advantages, as the seat can be moved and adjusted to the desired position (especially convenient for those of slightly taller height). The corners between the buoyancy tubes and the fixed transom at the rear are equipped with special spray gussets that shed splashing water that occurs when the boat is in reverse or when the throttle is released after planing.
Transporting an inflated boat to the pond is easy, because there is a cast handle at the front and two soft ones at the back.
All AquaStar boats are certified according to European requirements and standards. The CE marking on the boats confirms their compliance with current European Union directives and their safety for consumers (Directive 94/25/EC, June 16, 1994).

Equipment:
Boat;
Seats;
6 liter pump;
Hard flooring;
Oars;
Handles for carrying the boat;
Lifeline;
Repair kit;
Boat carrying backpack;
User manual.

This model comes with a hard bottom SLD!