Updated model 2013!

The AquaStar K-330 inflatable boat is the perfect solution for outdoor recreation. Just think: no matter your destination, you'll always get there with this versatile and lightweight inflatable boat.
A collapsible deck, inflatable keelson, and duralumin power frame provide the AquaStar K-330 with excellent longitudinal rigidity, which translates into good seaworthiness, course stability, and ease of control.
The AquaStar K-330 inflatable boat is a professional, high-speed, high-safety inflatable boat.
The K-330 has a rigid bottom and can accommodate four passengers. It consists of four pressurized compartments (sealed tubes). Three of these compartments form the inflatable boat's frame. The fourth compartment is the keelson tube.
The length is 3.30 m, the width is 1.58 m, and the cylinder diameter is 43 cm. It can be equipped with a motor with a maximum power rating of 15 hp. The boat is made of 5-layer reinforced PVC fabric with a material density of 1100 grams per square meter.
The boat has a carrying capacity of 500 kg. This capacity is always measured with one deflated cylinder, simulating a breach in the pressurized compartment.
The boat's design includes a fixed transom for the motor with a standard 38 cm foot. The wooden bottom (what the boat's feet stand on) is rigid and solid. It consists of four wooden segments (floors) fastened with aluminum fasteners and, when the boat is inflated, forming a single rigid deck.
The boat bottom is made of PVC fabric with a density of 950 grams per square meter.
The keelson is an inflatable structure. It looks like a tube expanding from stern to bow. It is located between the fabric bottom and the wooden deck. When the keelson is inflated, the space between the bottom and deck expands, creating significant tension on the fabric deck. Due to the deadrise, boats of this type are much more maneuverable than flat-bottomed boats. The keelson also improves load-carrying capacity, unsinkability, stability, and, most importantly, safety.
Along the bottom, the keelson is protected from mechanical damage by a thick protective beam. A special wide rib with a protruding rib is also installed around the perimeter to protect the sides from mechanical damage. The protruding rib cuts off spray while the boat is underway.
Along the boat's sides, aluminum reinforcements—stringers—are installed internally. These stringers serve several functions: they rigidly support the bottom and strengthen the boat's frame against buckling and bending in waves.
The two benches (also known as seats or stools) are movable. They are attached to special rails (guides) at the top, along the boat's buoyancy tubes. This feature of the boat offers several advantages (for example, if you place all the benches together, you can create a wonderful table). It's especially convenient for people of different heights.
Three handles are attached to the bow, mounted on cones, for easy transport. These attachments make the boat very comfortable to carry, even with two people (front and back). The bow handle is located below the fender for easy transport. It also serves as a towing eye.
The boat is equipped with spray gussets at the corners between the rudder tube and the rear transom. These gussets help to deflect water splashes that occur when the boat is in reverse or when the throttle is released after planing.
A drain valve is mounted at the bottom of the transom, allowing water to be drained without capsizing the boat. The transom's end and sides are protected by pads. These pads prevent mechanical damage caused by motor operation.
All wooden elements are made from moisture-resistant marine-grade plywood. Hardwoods are used throughout, including oak, acacia, and birch.
The boat weighs 45 kg.
The basic kit includes: 2 packing bags (one for the boat frame, the other for the bottom), passport, operating instructions, a 6.5-liter foot pump, extended aluminum sealed collapsible oars, stringers, cans, a field repair kit (a tube of glue and a piece of uniform fabric).

All AquaStar boats are certified according to European requirements and standards. The CE marking on the boats confirms their compliance with current European Union directives and their safety for consumers (Directive 94/25/EC, June 16, 1994).